KANSAI SPECIAL RX9800 User Manual

INSTRUCTION
INSTRUCTIONINSTRUCTION
INSTRUCTION
RX/UTC MANUAL
Industrial
IndustrialIndustrial
Industrial Sewing
SewingSewing
Sewing Machines
MachinesMachines
Machines
First published : September 1991
Eighth edition : July 2001
No. 010086

KANSAI SPECIAL RX9800 Specifications

General

Brand	KANSAI SPECIAL
Model	RX9800
Category	Sewing Machine
Language	English

Summary

ADJUSTING THE THREAD TRIMMER AIR CYLINDER

ADJUSTING THE THREAD TRIMMER SOLENOID

ADJUSTING THE THREAD TRIMMER

Position of Movable and Stationary Knife

Sets knife positions and 0.5mm engagement for trimming.

Adjusting Looper Thread Clamp Spring

Positions looper thread clamp spring for 2.2mm protrusion.

Adjusting Stationary Knife Holder Stopper

Adjusting Movable Knife Holder Left and Right

Adjusting Movable Knife Front to Back

Adjusting Movable Knife Up and Down

Movable Knife, Needle Thread, and Looper Thread Relationship

Looper Thread Clamp Spring Pressure

ADJUSTING THE THREAD RELEASER

Thread Releaser Plate

Thread Releaser Hook

ADJUSTING THE PRESSER FOOT LIFT

ADJUSTING THE TOP COVER THREAD TRIMMER

Knife Position and Alignment

Aligns movable/stationary knives and sets cylinder clearance.

Adjusting Top Cover Thread Clamp Spring

Adjusting Movable Knife Pressure Spring

Adjusts movable knife pressure spring retraction.

Adjusting Movable Knife Left to Right

Adjusting Movable Knife Height

Adjusting Solenoid Return Spring

Adjusting Top Cover Thread Releaser Hook