Kärcher FC 5 User Manual

English 11
CAUTION
Cleaning rollers will start to rotate
when device is powered on. Hold the
handle tight to prevent the device from
moving forward by itself.
ATTENTION
The device should only be operated
with water. Before operating, ensure
fresh water tank is full and waste water
tank is empty.
1 Remove the power cord by swive-
ling cord releases and plug into an
outlet.
1 To quickly wet rollers, use measur-
ing cup to fill the storage station
with 1,7 oz (0.05 l) of fresh water.
2 Press On/Off button to power ON
device and place in storage station
for 5 seconds.
The device now has correct level of
moisture to allow for cleaning.
3 Press On/Off button to power OFF
device.
 Remove the device from storage
station and place on floor.
 Firmly hold device using handle.
 Press On/Off button to power ON
device.
Operating device

Kärcher FC 5 Specifications

General

Power source	AC
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Maximum input power	460 W
Type	Cylinder vacuum
Product type	Upright vacuum
Cleaning type	Wet
Dust capacity	0.2 L
Product color	White
Dust container type	Bagless
Liquid tank capacity	0.4 L
Removable handheld vacuum	-
International Protection (IP) code	IPX4
Proper use	Home
Cleaning surfaces	Hard floor
Dirt separating method	Aqua filtering
Surface coverage per tank	60 m²
Working width (standard brush)	300 mm

Weight and Dimensions

Depth	320 mm
Width	270 mm
Height	1220 mm
Weight	5000 g