Kärcher FC 5 User Manual

18 English
ATTENTION
To avoid performance issues, clean
device if large debris. While the appli-
ance is working, these parts will cause
a rattling noise or will block up the suc-
tion ducts, diminishing suction perfor-
mance.
 Press On/Off button to power OFF
device.
 Unplug from socket.
 Remove the cleaning rollers.
See "Cleaning the rollers".
1 Press the suction head lock.
2 Take off the suction head lid.
 Clean suction head cover under
running water.
 If necessary, remove particle de-
posits from suction ducts and slits in
the suction head cover.
 Clean the suction head with a damp
cloth.
 Fix the suction head lid onto the
suction head.
 Screw cleaning rollers onto the
threaded rod until secure.
See "Cleaning the rollers".
Cleaning the suction head

Kärcher FC 5 Specifications

General

Power source	AC
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Maximum input power	460 W
Type	Cylinder vacuum
Product type	Upright vacuum
Cleaning type	Wet
Dust capacity	0.2 L
Product color	White
Dust container type	Bagless
Liquid tank capacity	0.4 L
Removable handheld vacuum	-
International Protection (IP) code	IPX4
Proper use	Home
Cleaning surfaces	Hard floor
Dirt separating method	Aqua filtering
Surface coverage per tank	60 m²
Working width (standard brush)	300 mm

Weight and Dimensions

Depth	320 mm
Width	270 mm
Height	1220 mm
Weight	5000 g