Need help?Do you have a question about the Kathrein CAP 710 and is the answer not in the manual?
General| Manufacturer | Kathrein |
|---|---|
| Material | Aluminum |
| Frequency Range | 10.7 - 12.75 GHz |
| Operating Temperature | -40°C to +60°C |
| Weight | 5.5 kg |
| Input Connector | F-Type |
| Output Connector | F-Type |
Provides contact details for the manufacturer and accredited representatives.
Details the intended purpose and scope of the MobiSet 3 digital CAP 710.
Outlines critical safety measures to be taken during the installation process.
Emphasizes the importance of correct installation and adherence to safety guidelines.
Provides specific instructions and warnings regarding the use of adhesive sealant.
Covers legal regulations concerning the installation of the turntable on vehicles.
Instructions for laying and securing cables to prevent hazards.
Details requirements and safety precautions for the power supply and fusing.
Lists essential checks to perform before starting a journey with the installed system.
Mandates lowering the antenna to park position for safe driving.
Highlights crucial safety measures during the operational use of the turntable.
Lists all necessary tools and equipment required for the installation process.
Guides on how to unpack and prepare the CAP 710 unit for installation.
Provides criteria and considerations for choosing the optimal installation site.
Detailed steps for installing the cable gland and mounting plate on the vehicle roof.
Instructions for installing the turntable assembly onto the mounting plate.
Specific instructions for installing the turntable with an internal cable gland.
Instructions for installing the turntable using an external cable gland.
A concise visual guide to the main steps involved in installing the turntable.
Guidance on installing the UFS 940SW receiver unit.
Guidance on selecting an appropriate location for installing the UFS 940SW receiver.
Steps to prepare the receiver unit before final installation.
Steps to remove blanking plugs from the receiver unit.
Instructions on how to attach the infra-red sensor to the receiver.
Key instructions to follow for a correct and safe receiver installation.
Advice on selecting and using alternative screws for installation if supplied ones are unsuitable.
Provides tips for mounting the receiver onto a television set.
Guides on accurately marking drilling points for receiver installation.
Final steps for securing the receiver at its chosen installation location.
Steps for routing cables and connecting the turntable to the UFS 940SW.
Detailed instructions for connecting the receiver to the power supply.
Explains functional aspects of connecting the system to the vehicle's power supply.
Illustrates a typical wiring diagram for a 12V battery connection.
A critical warning against attempting to service the turntable internally.
Provides step-by-step instructions for safely dismantling the system for servicing.
Lists contact information for authorized service centers.
Explains how to adjust the LNB for optimal signal reception.
Crucial safety advice for users performing setting operations.
Step-by-step guide for performing the necessary setting operations for the system.
Critical safety warnings related to manual lowering procedures.
Detailed instructions on how to manually lower the antenna to its park position.
Provides detailed physical dimensions of the CAP 710 system in millimeters.
Information on the product, its manufacturer, and contact details.
Details the chemical composition and hazardous components of Sikaflex® 291.
Identifies potential health and environmental hazards associated with the product.
Provides immediate first aid instructions in case of exposure or ingestion.
Outlines appropriate extinguishing media and fire safety precautions.
Procedures for handling accidental spills and environmental protection measures.
Guidelines for safe handling, storage, and hygiene practices.
Information on workplace exposure limits and required personal protective equipment.
Describes the physical and chemical properties of Sikaflex® 291.
Information on the product's stability and potential hazardous reactions.
Details the toxicological effects of the product on human health.
Information on the product's environmental impact and ecological effects.
Guidance on proper disposal methods for the product and packaging.
Information related to the safe transport of the product.
Lists relevant EC directives and national regulations applicable to the product.
Lists hazard and safety phrases associated with product components.
Lists safety phrases related to handling and use.
Highlights specific components requiring special identification.
Mentions national regulations, such as water contamination class.
Contains miscellaneous information and revision notes for the safety data sheet.
Version and date of the technical data sheet.
Lists key technical properties and specifications of Sikaflex® 291.
Provides a general description of Sikaflex® 291 and its development.
Highlights the benefits and advantages of using Sikaflex® 291.
Details the various applications and suitable substrates for Sikaflex® 291.
Explains the process by which Sikaflex® 291 cures.
Advises reading and following safety instructions for handling the unit.
Guidance on selecting an unobstructed location for optimal satellite reception.
Instructions to prevent overheating of turntable motors by limiting continuous operation.
Explains the role of the ignition signal in automatic antenna positioning.
Confirms that all settings are managed via the remote control.
Advises reading safety and installation sections before first use.
Stresses not connecting to power until installation is complete.
Option to select or restore a factory pre-programmed channel list.
Guides on selecting the video output connection type (HDMI or Video).
Allows selection of the picture resolution sent to the TV via HDMI.
Enables selection of the TV picture format (e.g., 4:3, 16:9).
Configures screen display for 4:3 broadcasts on 16:9 TVs.
Sets the screen display aspect ratio.
Selects the audio signal type for HDMI transmission.
Allows selection of the TV standard (PAL, NTSC, MULTI).
Controls automatic TV switching based on receiver status.
Guides selecting the 'CAP' system and initializing it.
Allows setting the local time offset relative to UTC.
Configures automatic adjustment for daylight saving time.
Instructions on how to access the CAP menu for turntable settings.
Procedure to reset satellite positions and reinitialize the CAP system.
Enables setting GPS coordinates to speed up satellite searches.
Guides on manually adjusting the antenna's position, with warnings.
Allows inputting the desired elevation angle for the antenna.
Notes that this function is not available on the CAP 710.
Configures whether the antenna stops automatically upon detecting a signal.
Instructions for rotating the antenna to find the satellite's azimuth.
Instructions to move the antenna to its safe park position.
Access to important basic settings like elevation border and offset.
Explains settings for elevation limits and offsets, with warnings.
Options to adjust the speed of satellite search for better results.
Describes the automatic process of aligning the antenna to satellites.
Explains how channel selection triggers a satellite search.
Warns about potential search failure if the vehicle moves.
Details different scenarios triggering satellite searches.
Covers the fine adjustment phase and initial picture display post-search.
Guides on navigating and selecting channels from the list.
How to view and select channels sorted by satellite.
Notes that the timer function is not yet available in CAP mode.
Describes antenna behavior and search process when the vehicle changes location.
Explains how inputting GPS data can shorten search times.
Outlines the four methods for parking the antenna.
Displays messages related to system protection due to low voltage or critical temperature.
Details error messages and actions for inadequate power supply.
Explains automatic park movement upon ignition activation.
Describes how the system reacts to mechanical obstructions.
Alerts when the turntable motor temperature reaches critical levels.
Lists error messages related to software defects or fatal errors.
Covers additional messages like connection failures or ignition cable issues.
Indicates when a selected satellite is not receivable from the current location.
Notes that the timer function is unavailable in CAP mode.
Lists directives and harmonized standards the product complies with.
Instructions for disposing of electronic waste according to regulations.
Guidance on the correct disposal of spent batteries.
To Next Page
