English 37
(*) Computer used with the DEXIS Titanium sensor must meet this rating.
Guidance and manufacturer’s declaration - electromagnetic emissions
The DEXIS Titanium sensor, used with a compliant computer, is intended for use in the electromagnetic environment specified
below. The customer or the user of the DEXIS Titanium sensor should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1 The sensor uses RF energy only for its internal func-
tion. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 11
Class B The sensor is suitable for use in all establishments,
including domestic establishments and those di-
rectly connected to the public low-voltage power
supply network that supplies buildings used for do-
mestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A (*)
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies (*)
Titanium Manual.book Page 37 Monday, August 6, 2018 4:40 PM
To Next Page
Loading...
