Kawai MP11SE - Controllers and Knob Assign Parameters

47
EDIT Menu
EDIT Menu parameters (PIANO, E.PIANO, SUB)
6 Controllers
1. Right Pedal on, off
This parameter determines whether or not the right pedal of
the GFP-3 pedal unit is active for the selected section.
* This parameter is not stored to SOUND but to SETUP only.
2. Right Pedal Assign
18 functions (piano, suB)
28
functions (e.piano)
This parameter selects the function assigned to the right pedal
of the GFP-3 pedal unit.
* This parameter is common for all three sound sections.
* This parameter is not stored to SOUND but to SETUP only.
3. Damper Pedal Mode normal, Hold
This parameter determines whether or not the damper pedal
should sustain sounds indenitely without decay.
* This parameter is not stored to SOUND but to SETUP only.
4. Center Pedal on, off
This parameter determines whether or not the centre pedal of
the GFP-3 pedal unit is active for the selected section.
* This parameter is not stored to SOUND but to SETUP only.
5. Center Pedal Assign
This parameter selects the function assigned to the centre pedal
of the GFP-3 pedal unit.
* This parameter is common for all three sound sections.
* This parameter is not stored to SOUND but to SETUP only.
6. Left Pedal on, off
This parameter determines whether or not the left pedal of the
GFP-3 pedal unit is active for the selected section.
* This parameter is not stored to SOUND but to SETUP only.
7. Left Pedal Assign
18 functions (piano, suB)
28
functions (e.piano)
This parameter selects the function assigned to the left pedal of
the GFP-3 pedal unit.
* This parameter is common for all three sound sections.
* This parameter is not stored to SOUND but to SETUP only.
8. Pitch Bend on, off
This parameter determines whether or not the pitch bend
wheel is active for the selected section.
9. Pitch Bend Range value: 0 ~ 7
This parameter sets the range of the pitch bend wheel in semi-
tone steps.
* The range diers for the internal sound (0 ~7) and MIDI (0~12) sections.
10. Soft Pedal Depth value: 1 ~ 10
This parameter adjusts the eectiveness (i.e. depth/strength) of
the soft pedal.
* This parameter is not stored to SOUND but to SETUP only.