KB Genesis KBAC-24D - Model KBAC-24 D Mechanical Specifications; Models KBAC-27 D, 29, 45, 48 Mechanical Specifications

0.31 7.97
5.86
Maximum Depth:
149
8.20 9.53
208 242
2.53 64.4
0.25
8.85
225
6.4
4* 1* 2* 3*
5.51
129
5.06
140
2X ∅
11
FIGURE 3 – MODEL KBAC-24D MECHANICAL SPECIFICATIONS (INCHES/mm) FIGURE 4 – MODELS KBAC-27D, 29, 45, 48 MECHANICAL SPECIFICATIONS (INCHES/mm)
Contains 2 mounting holes for standard 1/2” liquidtight fittings
* Tighten these screws, in the sequence shown, to 12 in-lbs (14 kg-cm).
* Tighten these screws, in the sequence shown, to 12 in-lbs (14 kg-cm).
Contains 2 mounting holes for standard 1/2” liquidtight fittings and 1 mounting hole for standard 3/4” liquidtight fitting.
0.30 7.37
2X 2X
25.4
2X
77.7 1.00 3.05
7.55
192
7.15
181
7.25
184
2X
6.4
8.50
216
0.25
9.80
249
9.25
235
4X ∅
Maximum Depth:
4* 1* 2* 3*