KBL mega Sun K9S - Aqua Cool and Aroma Connections; Initial Operation

Assembly Instructions | megaSun K9S
56
6.6 Aqua Cool and Aroma
connections
AQUACOOL
The Aqua Cool box is equipped with a liquid-level
sensor ① as well as with a connection to the Aqua
Cool canister ②. Furthermore, the box houses the
compressor ensuring the compressed-air supply ③,
and the Aroma box ④ with its related connections.
①
②
④
③
FURTHER POSSIBLE CONSTRUCTION TYPE
①
②
④
③
1 Connector (liquid-level monitoring)
2 Connection to Aqua Cool canister
3
Compressor with compressed-air
connection
4 Aroma box
AROMA
The Aroma box is attached within the Aqua Cool box
and equipped with three hose connections, one for
the compressed-air supply
⑤ and two leading to the
⑥.
⑥⑥
⑤
5 Aroma box (inlet)
6 Aroma box (outlets)
6.7 Initial operation
• Turn on the supply voltage.
• Start the Aqua Cool initialisation before tanning for
        
Start Initialisation“.
• Test all functions in a trial run.
• 
• Clean the tanning device.