Assembly Instructions | megaSun K9S
45
Assembly steps
Refer to chapter
Install electronic box
• Install electronic box
• Open electronics tray
• Connect mains cable
• Connect main fan plug
• Connect patch cable
• Install the cover plate of the electronics tray
• Connect ground cable
• Connect plugs
4.10
Install the bench
• Install bench
• Remove bench dampers
• Connect plugs
• Uninstall mounting handles
4.9
5.3.1
4.9.3
4.9.2
4.9.1
Install air conditioner
• Install air conditioner
• Connect plug
4.8
4.8.2
4.8.1
Install Aqua/Aroma unit
• Install Aqua/Aroma unit
• Install both hoses
• Connect plug
4.7
Install front panel
• Install front panel
• Connect plug
• Install the screws
• Install panels
•
• Close bench
4.6
5.4.1
5.4.2
Install the ducting pane and the bench pane
• Install bench pane
• Install telescopic props
• Install ducting pane
• Close bench pane
4.5
5.6.2
5.6.1
Install back wall pane
• Install plastic parts
4.4