Rev. 1.00
22585_EDEBDA0252-0318-1_EN
15
KBR multicomp F144-3 6DO/12DO
Error message dialog:
Missing measuring voltage The setting Message or
Missing stage power Alarm relay or Message and
PFC too small Alarm relay or O
THD too high is identical for all errors!
No measuring current
Light load
Temperature switch-o
Extras:
Display language German, English, French, Spanish
Limit THD 0 to 10%, harmonics monitoring can be dis-
abled (0%)
Scanning frequency Automatic, xed 50 Hz, xed 60 Hz
Stage power monitored Yes, No
Reset Run
Contrast setting 0 to 10
Brightness setting 0 to 9
Dimmer brightness 0 to 9
Light load limit 15 mA, 50 mA
Light load delay 1 minute to 60 minutes
Temperature measurement On / O
Output 6 or 12
(depending on the
controller version) Compensation stage, fan output
Switching threshold fan on > 0 °C to 60 °C
Switching threshold fan o 0 °C to 60 °C
Switching threshold system o > 0 °C to 60 °C
Switching threshold system on 0 °C to 60 °C
Bus mode Modbus (eBus for production)
Learning mode menu display On / O
Touch tones On / O
Control and display panel
To Next Page
Loading...
