KBR F144-MS-1V1C1TI6DO-3 - 8 Description of the Individual Display Windows; Initialization Window; Commissioning Window if no Stage Power Is Programmed

Rev. 1.00
22585_EDEBDA0252-0318-1_EN
26
KBR multicomp F144-3 6DO/12DO Description of the display window
multicomp 06 Th
Initialization
multicomp 12 Th
Initialization
Commissioning
next 
8 Description of the individual display win-
dows
8.1 Initialization window:
multicomp F144-3 6-stage or 12-stage
This is displayed after connecting the power supply to the controller.
NOTE
Please do not press any sensor buttons during initialization, as they are adjust-
ed automatically to ensure correct operation.
8.2 Commissioning window if no stage power is programmed
During initial startup of the multicomp F144-3, the Commissioning menu is dis-
played as the F144-3 start screen (after the initialization phase) once you have
connected the power supply.
This menu is used for initial startup of the controller, where all necessary set-
tings can be made.
If you wish to use a controller that is already integrated into a KBR compensa-
tion system by default, only the parameters of the current transformer need to
be con gured.
Press
W to select submenus.