KBR F144-MS-1V1C1TI6DO-3 - Stage State Window

Rev. 1.00
22585_EDEBDA0252-0318-1_EN
31
KBR multicomp F144-3 6DO/12DO
8.4 Stage state window:
Stage state
next 
Press W to select submenus.
The submenus in this window display whether or not the capacitor stages
connected are working in automatic mode, or if they are switched on or o
permanently. The individual capacitor stages can be selected by pressing
W.
You can change the stage state from Auto (Automatic) to ff (switched o
permanently) or n (switched on permanently) by pressing
U to start enter-
ing values,
V to make changes or X to save them.
NOTE
Capacitor stages that are permanently switched on or off are not available to
calculate the optimizing automatic operation.
Description of the display window