EasyManua.ls Logo

KDK 40BECH - Maintenance 29

KDK 40BECH
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
:
Cleaning the filter:
1. Do not wash the filter with water, because water may destroy the anti-microbial
performance of the filter; do not use a wire brush or any other hard tool to clean the filter,
lest the filter would be damaged.
Cleaning Precautions
:
使 使
使
Cleaning the louver:
1. To prevent color change and accelerated aging of the panel, do not use any type of diluent,
alkaline cleaner, benzene, alcohol, antiseptic, or steel ball as shown below.
2. To use a chemical cloth, clean this product by
following the instructions.
MAINTENANCE
Shut off the all-pole switch.
Wipe the front panel and the panel base
with a soft cloth.
Turn on the all-pole switch.
Reinstall the filter assembly.
Remove the filter assembly from the louver assembly.
Use a vacuum cleaner to remove dust from
the filter assembly.
Cleaning the louver assembly and filter assembly
(當 2200時(約 3月) )
2. When the filter cleaning indicator at the receiving part of the main body blinks, it is time to
clean the filter. You need to clean the filter. (When the accumulated running duration
reaches 2,200 hours (continuous running about three months), the filter cleaning indicator
will blink.)
29
Be sure to install the filter, otherwise
dust will enter the body.
Notice

Related product manuals