KDK 40BECH - Wiring Diagram; 使 用 及維護 注 意事項 27 28 ~ 維 護方法 29 30 ~ 電氣 原 理圖

維護方法
MAINTENANCE
每次清 潔過濾網後，建議將過濾網清潔 提示的累計
時間復 位。(長按模式按鈕3秒，放開後，聽到 “嗶”
的一聲 ，復位完成。)
Press and hold the MODE button at the mode button panel on main body
for 3 seconds. After releasing the button, a “beep” means the filter
cleaning indication is cleared. (The accumulated time of the filter cleaning
indication will be reset, and the time will be accumulated again.)
取消 過濾網清潔提示 。機體模 式按鈕面板
Clear the filter cleaning indication at the . mode button panel on main body
Each time cleaning the filter , you are advised
to reset the accumulated time of the filter
cleaning indication. (Press and hold the MODE
button for 3 seconds. After releasing the button,
a “beep” sound means the resetting is done.)
長按 模式按鈕3秒，放開 後，聽到“ 嗶”的一聲，過濾網清潔機體模 式按鈕面板
提示將 被解除。(過濾網清潔指示的累計時 間將重新累 計。)
30
電氣原理圖
WIRING DIAGRAM
※