EasyManua.ls Logo

KDK 40BECH - 電氣原理圖 30; Troubleshooting; Antibacterial Function; 常見 故 障的識 別與處 理

KDK 40BECH
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mode button panel
on main body
Remote control
The filter cleaning
indicator blinks quickly
Its time to clean the filter
Clean the filter
Remote control does
not work
The batteries may be
exhausted
Replace the batteries
Contact customer
consultation service center
or your distributor
Check the product according to the table below if a fault occurs. If an error still occurs, check that
the all-pole switch connected to this product is disconnected, and contact customer consultation
service center or your distributor.
Troubleshooting
Symptom
Cause
No hot wind blow out
Air volume reduced
The heater may fail
The filter may be blocked Clean the filter
Air
The running indicator
blinks quickly
The product is error
TROUBLESHOOTING
Contact customer
consultation service center
or your distributor
Textdisplayoftheremote
controllerisdim
Remote controller
display is unstable
31
99.9%
99.9% JIS Z28012010
使
使
ANTIBACTERIAL FUNCTION
The filter mesh in the filter mesh assembly provides the antibacterial function, with
the antibacterial ratio against staphylococcus aureus and the antibacterial ratio
against colibacillus up to 99.9 % respectively (test basis: JIS Z2801:2010).
After using for a period of time, the colour of the filter mesh will change from yellow
to brown, but the changing material colour will not affect performance.
As the use time increases, the antibacterial performance of the filter mesh will
decrease accordingly.

Related product manuals