KEB 00F6P00-3000 User Manual

The drive inverter parameters can be accessed from the File menu screen. If the invert-
er ‘.blb’ le is missing from the operator, the user can upload it from the ‘conguration
missing’ screen.
The ‘F’ function keys will navigate as follows:
Key Function Bar Description
F1 Home Return to Home screen
F2 Pass Go to Password screen
F3 Setup Go to Setup screen
(Displays the active congID param-
eter list)
F4 File Go to File Menu screen
Figure 29: Program menu
7.5 Password screen
From the program menu, the password screen is used to change the inverter password.
The screen will display the current inverter password level. Pressing ENTER engages
the edit eld for the password. The
File menu screen will hide options based on the
password level from the inverter. The arrows keys can be used once the edit eld is
engaged. The password can be up to ten digits, each with a value of 0-9. Once the
password digits are selected, ENTER will set the password.
Key Function Bar Description
Enter
N/A Engage password edit eld
N/A Set password
F1 Prog Return to Program menu
F3 <- Remove digit
F4 >>
Add digit
p
N/A
Digit value scroll up
q
N/A
Digit value scroll down
Figure 30: Password screen
7.6 Setup screen
From the program menu, the setup screen displays various editable settings. The digit
values of the ‘File Access’ and ‘Scrolling Speed’ can be edited by pressing F4 when the
edit eld is displayed. Setting the scroll speed below ‘200’ will default it to ‘0’ and pause
scrolling.
The F4 key progresses to the Test screen where a key-by-key procedure will conrm all
eight keys function as intended.
All settings save and take e󰀨ect immediately, and will remain after rebooting.
43
SCREEN OVERVIEW

KEB 00F6P00-3000 Specifications

General

Brand	KEB
Model	00F6P00-3000
Category	DC Drives
Language	English