2 Product Description
Theservomotorforpitchsystemsisan8-polepermanent-eldsynchronousmotorwith
sine-wave inducted voltage and extremely high power density.
2.1 Specied application
The KEB synchronous servo motors are exclusively designed for the operation at digital
servo controllers. They are intended for industrial systems only. They comply with the
harmonized standards of the series VDE 0530/EN 60034-1
The technical data and information for connection conditions can be found on the type
plate and the instructions for use and must be complied with.
2.1.1 Residual risks
Despite intended use, the motor can reach unexpected operating conditions in case of
error, with wrong parameterization of the inverter, by faulty wiring or non-professional
interventions and repairs. This can be:
• wrong direction of rotation
• motor speed too high
• motor is running into limitation
• motor can be under voltage even in standstill
• automatic start
• motor coasts to standstill
2.2 Unintended use
The operation of our products outside the indicated limit values of the technical data
leads to the loss of any liability claims!
2.3 Overview of the motor
Name Material numbers
Servo motor for pitch systems size 10 7606910-40xx
Servo motor for pitch systems size 13 7607613-40xx
19
PRODUCT DESCRIPTION
To Next Page
Loading...