KEB 7608000-4001

3.3 Degree of protection of servo motors
See table below for the respective sealing in face of power transmission elements
(transmissions etc.).
Shaft sealing
Degree of
protection
User information
No IP 65
Theeffecttomoistureintheshaftandange
area must be kept to a minimum. No liquid
may remain in the D end shield, if the motor
is mounted with the "shaft end upward" (IM
V3, IM V36).
Table 5: IP degree of protection
Thespecicdegreeofprotectioncanonlybecomplied,ifthedriveismounted
to a gear box and the motor plug is properly attached!
27
TECHNICAL DATA