KEB 7608000-4001

3.4.2 Shaft end for the servo motor 7606910-40xx
The motor has a shaft end with a keyway to DIN 6885 Part 1. Use suitable devices for
mounting and pulling off driving elements. Support the device at the D(AS) shaft end.
Use suitable tool!
Do not expose the motor to any impacts or blows.
Ø 28
k6
5
50
48570
Ø 45
k5
Ø 37,5 -0,2
0
Ø 40
k6
1,85 0
+0,1
34,25 0
+0,05
38,5 0
+0,2
46,5
34,4 0
+ 0,2
AB 12x8x28 DIN 6885/1
DIN 6885/1
(Motor)
DIN 332/2 - D M10
Figure 5: Shaft end of the servo motor 7606910-40xx
30
TECHNICAL DATA