Keba Kemro MM 240/A - 3 Description of the module; 3.1 Front view

3 Description of the module
The MM 240/A is an Encoder interface module with 2 incremental encoder
inputs. It has two latch inputs for recording events.
3.1 Front view
Fig.3-1: MM 240/A front view
1
... power supply 2 ... 2 Latch inputs
3 ... Encoder input 0 4 ... Encoder input 1
Information
● The Encoder interface module MM 240/A is not designed for drive control.
● The type plate is stored on the module in an EEPROM and can be read
out by the application.
MM 240/A
Description of the module
© KEBA 2010
Project engineering manual V1.08 11