Keba Kemro MM 240/A - Connection Example; Pin Assignment

4.3.1 Connection example
Fig.4-5: Connection example for encoder inputs with transducer supply and latch
● INC0 is connected to a transducer via a 5 V (differential) interface. The
transducer is supplied with 5 V operating voltage by the MM 240/A.
● INC1 is connected to a transducer with 24 V interface. The transducer is
also supplied by the MM 240/A.
● The latch function is used for both transducers. The latch inputs are con-
figured to Sink.
4.3.2 Pin assignment
Fig.4-6: Encoder interface, 9-pole DSUB socket connection, seen from front
Connections and wiring
MM 240/A
© KEBA 2010
Project engineering manual V1.0816