Keba Kemro MM 240/A - Accessories; Connector Strip

3.2 Accessories
3.2.1 Connector strip
Input-/output signals: Standard male connectors with grid dimension 5.08 mm.
The following female connectors are required for the MM 240/A:
● 1 block with 2 connections (module supply)
● 1 block with 2 connections (latch inputs)
Female connector Color Number Order no. Weidmüller
2-pole sw 1 BLZF 5.08/2 SN SW - 170769
Information
Larger terminal blocks may be used to group multiple signals. The current
carrying capacity of the terminal block is thus, however, reduced (according
to derating curve of the terminal block manufacturer.)
The appropriate female connectors are not included in the delivery of KEBA,
but can be purchased from KEBA.
For further information: See System manual.
Description of the module MM 240/A
© KEBA 2010
Project engineering manual V1.0812