Keba Kemro MM 240/A - 10 EC Directives and Standards; EC Directives; Standards; General Procedures and Safety Principles

10 EC directives and standards
10.1 EC directives
Guideline 2004/108/EG EU guideline on electromagnetic compatibility
Guideline 2002/95/EG RoHS guideline
10.2 Standards
To check the conformity of the system with the directives, the following non-
binding legal European standards were applied:
10.2.1 General procedures and safety principles
EN 61131-1:2003
Programmable controllers - Part 1
Information
This product was developed for the use in industrial areas and can cause
radio interference when used in residential areas.
10.2.2 EMC guideline
EN 61131-2:2003
Programmable controllers - Part 2
10.2.3 Electrical safety and fire protection
EN 61131-2:2003
Programmable controllers - Part 2
10.2.4 Environmental and surrounding conditions
EN 61131-2:2003
Programmable controllers - Part 2
10.3 Standards for the American market
10.3.1 UL test for industrial control equipment
UL 508, 2005
Industrial Control Equipment
EC directives and standards MM 240/A
© KEBA 2010
Project engineering manual V1.0830