KEEBOX Wireless 11n Router
In WAN Interface Settings, use the drop-down list to choose Dynamic or Static IP. If Dynamic IP is
selected, you may need to enter the MAC address of the computer or click Clone MAC to directly copy
the MAC address of the computer. If Static IP is selected, enter the IP address, its subnet mask and
gateway’s IP address.
In PPTP Settings, enter the username in Login, its Password, and Service IP address. Leave the MTU
value at the default setting unless you have specific reasons to change this.
Click Next to continue.
If selecting Others, click Next and the following window appears.
Use the drop-down list to select a WAN mode and configure the settings. Click Next to continue.
18
To Next Page
Loading...
