40
HIP ABDUCTOR
CYLINDER ADJUSTMENT
NOTICE: CYLINDERS ARE FACTORY-ADJUSTED AND REQUIRE NO
FURTHER ADJUSTMENT UNLESS THEY ARE REPLACED. Please contact
KEISER if you have any questions concerning adjustments or repairs.
1. Check the condition of the rubber crutch tips that the exercise arms rest against.
These must not be worn or damaged in any way. If they are worn replace them
before attempting to adjust a cylinder.
2. If the cylinder is not bottomed-out, check the number of threads above the jam nut.
There should be 3 to 5 threads visible. If more threads are visible, the machine will
not have a full stroke and performance will be affected (pg. 13 maintenance manual).
To Next Page
Loading...
