Keiser M SERIES Assembly And Operation Manual

M5i | M5 STRIDER ELLIPTICAL
21
Every Workout
• Strider Elliptical is properly stabilized, level to the oor (refer to “Leveler Foot” section,
page 14).
• Check that parts most susceptible to wear are not damaged or broken (Handles, Grips,
Adjustment Knobs, and Footpads).
• Cleaning: Target areas in the sweat path with a damp soft towel or cloth.
Monthly
• Clean the external body/parts thoroughly, targeting areas that come in contact with
sweat, using a damp soft towel and a mild detergent (neutral, non-caustic). Wipe dry
the equipment.
Quarterly
• Apply wax to protect the paint nish on metal parts:
1. Wipe down and thoroughly clean the Strider Elliptical prior to applying wax.
2. Use an easily applied automotive treatment such as Meguiar’s
®
Quik Detailer Mist
and Wipe.
3. Target areas that come in contact with sweat as they are most vulnerable to rust.
NOTE: Failure to apply a coat of wax to high-sweat areas at a minimum of four times a
year will decrease paint and frame life due to corrosion and will void the warranty.
Annually
• Check to ensure all external visible screws and nuts are not loose and that they are tightened.
• Check that parts most susceptible to wear and replace if damaged or broken (Handles, Grips,
Adjustment Knobs, and Footpads).
• The low battery signal (“LO-BA”) will appear on the computer display when it is time to
replace the batteries (two AA batteries, refer to “Computer Battery Replacement” on page
22 for complete instructions).
NOTE: For establishments with multiple Strider Elliptical machines, replacement of all
computer batteries at the same time is recommended.
• Apply LPS 3
®
Rust Inhibitor or WD-40
®
Long-Term Corrosion Inhibitor to the Right Rear
Bracket Bearing at the base of the Crank Arm and the inner/outer Hanger Pedal Mount
Bearings and Bolts.
• Apply lubricant to the Adjustment Knobs:
1. Unscrew Adjustment Knobs from the Arm.
2. Clean threads with a lint-free cloth.
3. Apply a moderate amount of lubricant to the threads.
NOTE: Both the threaded stud and the threaded insert nut are stainless steel. It is critical to
keep the threads lubricated with a heavy grease (preferably white or clear in color), such
as HYDROTEX
®
Acculube #2 or any compound with equivalent anti-wear and corrosion
resistant properties.
Weekly
for the
1st Month
• Check to ensure that the Strider Elliptical is in safe proper working order (perform the
full “Proper Operation Check,” page 14).
• Check that parts most susceptible to wear are not damaged or broken (Handles, Grips,
Adjustment Knobs, and Footpads).
CAUTION: Routine maintenance is an essential part of maintaining the highest level of equipment safety,
as well as optimal equipment performance. Immediately replace damaged, worn, or broken parts and do not
use the Strider Elliptical until all repairs have been completed and tested by a certied Keiser technician.
MAINTENANCE
PREVENTATIVE MAINTENANCE SCHEDULE

Keiser M SERIES Specifications

General

Brand	Keiser
Model	M SERIES
Category	Fitness Equipment
Language	English