Keiser m5 - Tools You will Need

NOTE: The substitution or modication of any part or component, other than what is
approved by Keiser, will void your warranty.
TOOLS YOU WILL NEED
You will need the following tools for assembly Torque wrench (Minimum 13 Nm / 10 ft-lb)
One ratchet with 13mm socket 6mm Allen wrench
One 13mm wrench Scissors or other safe cutting tool
#2 Phillips screwdriver Paste or spray wax (post assembly cleaning)
LPS Heavy Duty Rust Inhibitor w/straw Clean cloth
5mm Allen Wrench
11
8
2
3
4
10
9
5
6
7
1
1 - Moving Handlebars 7 - Storage Tray
2 - Stationary Handlebars 8 - Flywheel
3 - Computer 9 - Footpad
4 - Resistance Shifter 10 - Transport Wheels
5 - Height Adjustment Handle 11 - Base
6 - Water Bottle Holder