P r e f e r e n c e S o v e r v i e W
1
VeloCiTy CurVe: Applies a curve to
the velocity data. This can be used to
adjust the velocity response of the keys.
The following options are available:
• Linear
• Logarithmic
• Sine
• Cosine
• Exponential
• Invert
2
Pressure disaBled reTurn Value:
The value entered here will be output as
a pressure message anytime the Press
button is used to disable pressure on the
K-Board.
Enter a value of -1 to disable this feature.
3
TilT disaBled reTurn Value: The
value entered here will be output as a tilt
message anytime the Tilt button is used to
disable the tilt gesture on the K-Board.
Enter a value of -1 to disable this feature.
• Note: This feature will not function
when tilt is set to output pitch bend
messages. It will only work when set to
output CC messages.
PREFERENCES
VELOCITY CURVE
PRESSURE DISABLED RETURN VALUE
TILT DISABLED RETURN VALUE
ON THRESHOLD
off
Linear
off
1
CLOSE
1
2
3
4
5
The preferences section of the
editor offers a few deeper,
more advanced options for
customizing your K-Board’s
behavior...
4
on Threshold: Sets the amount
of pressure required for a key to be
activated.
5
Close PreferenCes: Clicking this
button will exit the preferences window
and return to the editor’s main window.
K-Board Editor | 15