Keith McMillen Instruments K-Board User Manual

TILT
Bend pitch and modulate effects by tilting your fingers
up and down on the keyboard.
TILT DOWN
TILT UP
Press and hold the Tilt button for 1
second to enable or disable tilt data. The
LED will turn on when tilt is enabled and
will turn off when disabled.
Tilt fingers UP toward the top
of the keys to increase the
current tilt value.
Tilt fingers DOWN toward
the bottom of the keys to
decrease the current tilt
value.
Advanced Info
When multiple keys are held down the K-Board will output
the average tilt value of all currently active keys, allowing for
more precise control of your software.
By default, tilt data will be output as pitch bend messages. If
necessary, this can be changed to any CC number by using
the K-Board software editor.
Getting Started | 8

Keith McMillen Instruments K-Board Specifications

General

Brand	Keith McMillen Instruments
Model	K-Board
Category	Musical Instrument
Language	English