Include multiple channels in a single scan step
Through the remote control interface, you can use scan.addimagestep to combine a list of
channels into a scan step.
The following example creates five scan steps with the indicated channels.
scan.create()
scan.addimagestep("1006,1007")
scan.addimagestep("1010,1011")
scan.addimagestep("1012,1013")
scan.addimagestep("1014,1015")
Remote interface scanning
Scan and trigger commands
The following list contains commands associated with triggers and bus operation scanning:
• lan.trigger[N].clear() (on page 11-273)
• trigger.blender[N].stimulus[M] (on page 11-409)
• trigger.blender[N].wait() (on page 11-410)
• trigger.timer[N].clear() (on page 11-412)
• trigger.timer[N].stimulus (on page 11-417)
• digio.trigger[N].clear() (on page 11-117)
• digio.trigger[N].pulsewidth (on page 11-120)
• digio.trigger[N].stimulus (on page 11-122)
• digio.trigger[N].wait() (on page 11-124)
• lan.trigger[N].assert() (on page 11-273)
• lan.trigger[N].clear() (on page 11-273)
• lan.trigger[N].overrun (on page 11-278)
• lan.trigger[N].stimulus (on page 11-280)
• lan.trigger[N].wait() (on page 11-282)
• scan.add() (on page 11-309)
• scan.background() (on page 11-313)
• scan.bypass (on page 11-314)
• scan.create() (on page 11-315)
• scan.execute() (on page 11-317)
• scan.list() (on page 11-318)
• scan.measurecount (on page 11-320)
• scan.mode (on page 11-321)
• scan.reset() (on page 11-324)
• scan.scancount (on page 11-325)
• scan.state() (on page 11-326)
• scan.stepcount (on page 11-327)
• scan.trigger.arm.clear() (on page 11-327)
• scan.trigger.arm.set() (on page 11-328)
• scan.trigger.arm.stimulus (on page 11-328)
To Next Page
Loading...
