Need help?Do you have a question about the Keithley 6485 and is the answer not in the manual?
General| Model | Keithley 6485 |
|---|---|
| Category | Picoammeter |
| Input Impedance | >10^14 Ohms |
| Voltage Burden | <200µV |
| Accuracy | 0.4% of reading |
| Voltage Source Range | Not Applicable |
| Voltage Source Resolution | Not Applicable |
| Voltage Source Accuracy | Not Applicable |
| Interface | IEEE-488 |
| Power Requirements | 100V to 240V AC, 50/60Hz |
| Dimensions | 89 mm high x 214 mm wide x 369 mm deep (3.5 in x 8.4 in x 14.5 in) |
To Next Page
