In the GRAPH swipe screen shown here, you can view the
measurements as they occur. To see a full screen graph,
touch the graph icon on the right side of the swipe screen
header bar to go to the Graph screen. In the full-screen
graph, you can also change the data and scale of the
information that is displayed on the graph.
ENTER and EXIT keys
The ENTER key selects a highlighted option. In most cases,
it opens a menu or dialog box that allows you to make
settings for that option.
The EXIT key returns to the previous screen or closes a
dialog box. For example, if you are in the MENU screen,
press EXIT to return to the home screen.
TRIGGER key
The action of the TRIGGER key depends on the
measurement method that is selected:
• If you set the instrument to continuously trigger, this
displays a dialog box that allows you to select another
measurement method.
• If you set the instrument to manually trigger, pressing
the TRIGGER key causes the instrument to make a
measurement.
• If you dened a trigger model, pressing the TRIGGER
key initiates the trigger model.
To change the measurement method, hold the TRIGGER key
for three seconds to display the methods you can choose.
To Next Page
Loading...
