Carefully consider and congure the appropriate
output‑o state, source levels, and compliance levels
before connecting the instrument to a device that can
deliver energy. Failure to consider the output‑o state,
source levels, and compliance levels may result in
damage to the instrument or to the device under test.
Power and environmental specications
For indoor use only.
Power supply
100 V
RMS
to 240 V
RMS
50 Hz to 60 Hz
(autosensing)
Maximum VA
350 VA
Operating altitude
Maximum 2000 m (6562 ft) above sea level
Operating
temperature
0 °C to 50 °C, 70% relative humidity up to 35 °C
Derate 3% relative humidity/°C, 35 °C to 50 °C
Storage temperature
–25 °C to +65 °C, 5% to 90% relative humidity
noncondensing
Pollution category
2
To Next Page
Loading...
Need help?
General
