Help
You can display help screens for the menu items and
buttons. The help screens give a brief description of
the option that the menu or button sets. To display the
description, highlight the menu item or button and press the
HELP key. The graphic below shows an example of the help
when you are on the System Events tab of the event log.
FUNCTION
The FUNCTION key opens the FUNCTION selection dialog
box, which allows you to select the source and measure
functions.
The instrument saves many of the settings with the source
or measure function that was active when you set them. For
example, if you set the measure function to current and you
set a value for NPLCs, the instrument saves the NPLC value
for that measure function. When you change the measure
function to voltage, the NPLC value changes to the value
that was last set for the voltage measure function.
Connect
To Next Page
Loading...
Need help?
General
