2: Using the front-panel interface Model 2460 Interactive SourceMeter® Instrument
2-8 2460-900-01 Rev. A / September 2014
Saving screen captures to a USB flash drive
You can save the content of the front-panel display to a graphic file. The instrument saves these
graphic files, also known as screen captures, in sequentially numbered files to the USB flash drive.
To save the screen capture:
1. Insert a USB flash drive in the USB port on front panel of the instrument.
2. Navigate to the screen you want to capture.
3. Press the HOME and ENTER keys. The instrument displays "Saving screen capture."
4. Release the keys.
To Next Page
Loading...
