Kelvinator Air Conditioning Operating the air conditioner 15
Operating temperature ranges
Indoor side
DB/WB°C
Outdoor side
DB/WB°C
32/23 43/26
21/15 21/-
27/- 24/18
20/- -7/-8
The operating temperature range (outdoor temperature)
for cooling only model is 21ºC~43ºC, for reverse cycle (heat
pump) models is -7ºC~43ºC.
If the air conditioner is used outside of the above conditions,
certain control features may come into operation and cause
the unit to function abnormally.
Optimal Operation
at people or pets.
level. Do not adjust the unit to excessive temperature
levels.
mode, otherwise, product performance will be reduced.
control to select the desired time for start-up and
shut-down.
as it reduces the efficiency of the unit and may cause
damage to the air conditioner.
heating performance may be reduced.
When the remote control is lost or fails to operate, please
use the manual switch on the indoor unit. The air conditioner
will operate in AUTO mode and the temperature setting or
fan speed cannot be changed.
manual control
button
manual control
button
mode. The air conditioner will select the mode COOL,
HEAT (heat pump model only) and FAN automatically
according to the room temperature for reaching the
best comfort.
conditioner off.
The operation mode is seen in the following table.
Mode Model Temperature setting Airflow
AUTO 25°C (COOL, FAN) AUTO
AUTO 25°C (COOL, FAN) AUTO
AUTO 20°C (HEAT ) AUTO
Emergency operation Operating Temperature