You have made a good choice. We are pleased to congratulate you on
your selection of a KEMPER machine. As your partner we offer quality
and performance, together with reliable service.
In order to be able to evaluate the conditions of use of our agricultural
machines, and to take these requirements into consideration in the
development of new units, we ask you to provide some information.
This also allows us to inform you selectively of new developments.
Customer Information
Product liability instructs manufacturers and dealers to hand over the
instruction manual with each machine and to give the customer practical
instruction on operation, safety and maintenance.
A multiple form (A, B, C) similar to the one illustrated below is supplied
with each Operator’s Manual. Confirmation is required that the customer
has taken possession of the machine and the Operator’s Manual.
For this purpose, send the signed document A to Kemper. Document B
is retained by the dealer who supplied the machine. Document C is
retained by the customer. At the same time you will be assured that
Conformity
This product has been submitted to the CE test and has obtained the CE
approval mark in conformity with the EC Directive 2006/42/EC. A CE
Certificate of Conformity is supplied with this manual. This certificate
must be handed over to the final owner of the machine together with the
Handing over the
Operator’s Manual
Attention! Even if the machine is sold at a later date by the customer,
the Operator’s Manual must be handed over to the new owner.
To Next Page
Loading...
