5.10 Working with the chopper C3000
PTO revolutions
Use PTO 1000 rpm
To obtain an regular an good
chopping quality keep PTO
revolutions regular.
Never use 4 th gear for security
reasons and to protect gearbox.
If you need different cutting length
take out knives.
Connecting intake components
When commissioning the crop-
chopper, whether with the rnaize
header or the grass pick-up, we
always recommend running the
intake unit with the tractor idling.
Due to the always speed of the blade
rotors and relatively high oscillating
mass, intake at full speed should be
avoided as far as possible.
Engaging and disengaging
(reversing in the event of blockages)
at full speed, including in quick
succession, can then be done
provided the blade rotors more or
less maintain their speed in relation
to idling.
To Next Page
Loading...
