5.9 Metalldetector C3000
The drive for the two front gathering drums, precompression and feed rollers
is via the
PTO,
flywheel and gearbox. If foreign objects or clods cause, a
blockage, the fuel flow to the intake System can .be cut off instantly (lever
10
at position "Autom.
0")
or can be put into reverse drive.
An impulse is passed via lever switch
10
to the lifting spindle
27,
which
releases the tension on the triple V-belt, thus cutting off the fuel supply.
The lifting spindle 27 continues to turn and the lever 68 of gear
30
moves to
the neutral position.
Adjustment after repair or replacernent
When checking the System or replacing components, please follow the
instructions below: Fig.
To Next Page
Loading...
