5.9 Metalldetector C3000
If the chopper is equipped with a metaldetector there are some hints:
- Electronical steering box
- bottom rubber feed drum ;
- clutch grips between drums and gearbox
The sentivity of the metal detector
can be adapted. Turn potentiometer
in box.
1 = less senitive
8 = very sensitiv
In the electronic box there is a 8
ampere fuse.
To open press and turn housings
Before harvesting check function
of detector
1. Electric on, PTO off
2. push joystick in position
intake
3. push carefully a metal part
close to .the rubber drum
4. clutch grip is closing
Detector okay
5. If clutch grip does not close
contact your dealer
Automatic fuel intake stop
To Next Page
Loading...
