5.3 Maize harvesting C3000
Release transportation
securities
Attention: connect friction clutch
on chopper gearbox
Which shaft to choose look cutting
length
Important!
Before first use of the machine make
a service on friction clutch. Tighten
bolts. Let chopper turn for 10
seconds. Discs will slip. Then
release bolts up to top completely.
Transportation securities have to be
put on the road. To unlock pull blot
out.
The header is hinged onto the
chopper with a main spring balance.
Adaptation to the ground contour is
achieved with the two height-
adjustable skids.
Big shocks by turning in the end of
the field are taken of the header.
To Next Page
Loading...
