Expression Pedals and Foot Switches 143
• soft button to simulate a button-triggered Morphing (this function can also be assigned to the QUICK button; the
PROFILER Stage even has its dedicated MORPH button)
• the parameters “Rise Time” and “Fall Time”, which are applied if Morphing is triggered via Remote’s or Stage’s Rig
Buttons 1-5 or another button
• “Momentary” option to select whether Morph Buttons are latched (default) or momentary
• soft buttons to clear Morphing either for the whole Rig or selectively by module. Please press and hold “Clear
Module” followed by the module button, e.g. Module D, that you want to clear
Monitor Volume Pedal (MIDI Control Change #73)
“Monitor Volume” is a special additional pedal option to control the volume of the MONITOR OUTPUT as well the
internal power amplifier of PowerHead and PowerRack. It allows you to generate controlled feedback through your
monitor cabinet.
To Next Page
Loading...
