Kemper PROFILER - Effects

Effects 151
Effects
The four modules named A, B, C and D, placed in the signal flow before the stack, are the ideal place for stomp box
type effects - like distortion, for instance. These modules are mono, because the amplifier will only accept a mono
signal. By contrast, the four modules X, MOD, DLY and REV work in stereo, if desired.
These eight effect modules offer you all kinds of effects which are easily identifiable by ten different colors:
Wah
Orange
Distortion/Booster/Shaper
Red
Equalizer
Yellow
Compressor/Noise Gate
Cyan
Chorus
Blue
Phaser/Flanger
Purple
Pitch Shifter
White
Delay/Reverb
Green
Pitch Shifter Delay
Light Green
Effect Loop
Pink