Kemper SmartMaster - Troubleshooting Common Malfunctions

KEMPER SmartMaster Operating Instructions - EN
7.4 Fault clearance
Malfunction
Possible Cause
Remedy
Not all smoke is
Distance of the exhaust
Place exhaust hood closer.
sucked in.
hood from welding position
too great.
Clean air outlet covered.
Keep clean air outlet free of
obstruction.
Horn sounds and
Extraction power too low,
Open damper in exhaust
green indicator light is
damper in the suction hood hood to full extent.
not lit.
is closed.
Filter cartridges saturated.
Change filter cartridges.
Dust comes out on the
Filter cartridges damaged.
Change filter cartridges.
clean air side.
Devices switch trips.
Motor blocked.
Have it checked by an
electrician.
Device does not start
No mains voltage.
Have it checked by an
up.
electrician.
Art. No.: 150 2220
- 56 -
Rev.:
7
Technical changes and errors excepted.
Latest update:
02/2015