Kemper SmartMaster - Product Overview

KEMPER SmartMaster Operating Instructions - EN
3 Product Description
The Smart Master is a compact welding fume filter device, which extracts welding
fumes right at the point where they are produced and exhausts them with a
separation rate of more than 99%. For this purpose the device is equipped with a
flexible exhaust arm whose exhaust hood is easily movable and which then retains
the position without any additional support. As an alternative to the exhaust arm, a
suction hose can be connected to the rear of the device. The exhausted air is purified
in a 3-stage filtering process and then returned to the work area again.
Illustration 1, Product Description
Item Designation
Item
Designation
1
Exhaust hood
8
Operating hours counter
2
Exhaust arm
9
Signal horn to change filter
3
Clamp fastener
10
Connection for suction hose
4
Maintenance door
11
Handle bar
5
Filter set
12
Cable holder
6
Device switch I / 0
13
Swivel castor with brake
7
Power indicator lamp
14
Rear wheel
Art. No.: 150 2220
- 40 -
Rev.:
7
Technical changes and errors excepted.
Latest update:
02/2015