Kemper SmartMaster - End-User Information and Responsibilities

KEMPER SmartMaster Operating Instructions - EN
1.3 Information for the End-user
The Operating Instructions are an essential part of the Smart Master.
The end-user shall ensure that operators take note of this instruction.
Based on national regulations for accident prevention and environmental protection,
the operating instructions are to be supplemented by the end-user's own operating
instructions, including information on regulatory and reporting requirements to meet
specific operating requirements, such as work organization, workflow and staff
employed. Apart from the operating instructions, as well as the regulations applicable
in the country and place of use concerning accident prevention, the recognized
technical rules for safe and professional work must be observed.
Without the approval of SINOtec GmbH, the end-user may not make any
modifications, additions or conversions to the SmartMaster that might affect safety!
Spare parts used must comply with SINOtec GmbH's specified technical
requirements. This is always guaranteed by using original spare parts!
Use only trained or instructed personnel for the operation, maintenance, repair and
transport of the SmartMaster. Make clear to the staff who is responsible for the
operation, maintenance, repair and transport.
Art. No.: 150 2220
- 36 -
Rev.:
7
Technical changes and errors excepted.
Latest update:
02/2015