Kemper SmartMaster - General Information and Remarks; Introduction and Copyright Information

KEMPER SmartMaster Operating Instructions - EN
1 General Remarks
1.1 Introduction
These Operating Instructions are a necessary and essential aid for the correct and
safe operation of the KEMPER SmartMaster welding fume filter unit , hereinafter
referred to as the SmartMaster.
The operating instructions contain important information for operating the
SmartMaster safely, properly and efficiently. Following the instructions helps to avoid
danger, reduce repair costs and downtime and increase the SmartMaster's reliability
and service life. The operating instructions must therefore always be at hand and
should be read by every person before working on or with the SmartMaster and the
information and advice provided in it is to be observed and applied.
Work on and with the SmartMaster includes in particular:
− transport and assembly,
− normal use and operation of the unit in the works,
− maintenance (care, servicing, filter change, fault clearance)
− final disposal
1.2 Notes on Copyrights
These Operating Instructions should be kept confidential. They should be made
accessible only to authorized persons. They may be passed on to third parties only
with the written consent from KEMPER.
All documents are protected under the Copyright Act. The reproduction and
distribution of documents, including excerpts, as well as re-use and passing on their
contents is not permitted unless this is expressly permitted in writing.
Violations are liable to prosecution and liable for damages. All rights to the exercise
of intellectual property are reserved for KEMPER GmbH.
Art. No.: 150 2220
- 35 -
Rev.:
7
Technical changes and errors excepted.
Latest update:
02/2015