Kemper SmartMaster - Safety Information; General Safety Guidelines and Symbols

Art. No.: 150 2220 - 37 - Rev.: 7
Technical changes and errors excepted. Latest update:
02/2015
2 Safety
2.1 General Remarks
The SmartMaster has been constructed in accordance with the latest state of
technology and generally acknowledged safety rules. When operating the
SmartMaster, hazards to the operator or damage to the SmartMaster an
d other
property may arise if:
− It is not operated by trained or instructed personnel,
− It is not used for the purpose intended and / or
− It is not properly maintained.
2.2 Notes on Signs and Symbols
KEMPER SmartMaster Operating Instructions - EN
2 Safety
2.1 General Remarks
The SmartMaster has been constructed in accordance with the latest state of
technology and generally acknowledged safety rules. When operating the
SmartMaster, hazards to the operator or damage to the SmartMaster and other
property may arise if:
− It is not operated by trained or instructed personnel,
− It is not used for the purpose intended and / or
− It is not properly maintained.
2.2 Notes on Signs and Symbols
DANGERG
This is a warning of an imminent danger situation with an inevitable
consequence of severe injury or death if the specified instruction is not
followed exactly.
WARNING
Draws attention to a potentially dangerous situation that could result in
severe personal injury or death if the specified instruction is not
followed exactly.
CAUTION
This is a warning of a potentially dangerous situation with the result of
moderate or minor injuries and property damage if the specified
instruction is not followed exactly.
NOTE
This is an indication of useful information for safe and proper handling.
• The bullet point marks work and / or operating steps in a sequence. The
steps are to be carried out in this order from top to bottom.
− The dash marks lists.
Art. No.: 150 2220
- 37 -
Rev.:
7
Technical changes and errors excepted.
Latest update:
02/2015