Kemppi 25 - Technical Data

EN
11. TECHNICAL DATA
Gun Loading
capacity
Ar +
CO2 (A)
Duty
cycle
(%)
Wire
diameters
(mm)
Type of
cooling
Cooling data
Max.
temp.
in inlet
(°C)
Min.
flow
rate
(l/min)
Min.
pressure
(bar)
Max.
pressure
(bar)
PMT 25
250 35 0,6 – 1,2 Air
PMT 27
270 35 0,6 – 1,2 Air
PMT 32
320 35 0,8 – 1,6 Air
PMT 35
350 35 0,8 – 1,6 Air
PMT 42
420 35 0,8 – 1,6 Air
PMT 30W
300 100 0,8 – 1,6 Liquid 50 1 1 5
PMT 42W
400 100 0,8 – 1,6 Liquid 50 1 1 5
PMT 52W
500 100 0,8 – 1,6 Liquid 50 1 1 5
Connection to Mig unit: Euro adapter
Make sure that the gun in use is designed for the maximum welding current
needed.
The guns meet construction and safety requirements according to norm
IEC / EN 60974-7.
15
PMT © Kemppi Oy / 1130