EN
1. PREFACE
1.1 GENERAL
Congratulations on choosing the MinarcMig equipment. Used correctly,
Kemppi products can signicantly increase the productivity of your welding,
and provide years of economical service.
This operating manual contains important information on the use,
maintenance and safety of your Kemppi product. The technical specications
of the equipment can be found at the end of the manual.
Please read the manual carefully before using the equipment for the rst
time. For your own safety and that of your working environment, pay
particular attention to the safety instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an
authorised Kemppi dealer, or visit the Kemppi web site at www.kemppi.com.
The specications presented in this manual are subject to change without
prior notice.
Important notes
Items in the manual that require particular attention in order to minimise
damage and personal harm are indicated with the ’NOTE!’ notation. Read
these sections carefully and follow their instructions.
1.2 PROPERTIES
MinarcMig Adaptive 180 is an easy-to-use MIG welding machine suitable
for both hobby and professional use. The welding machine is small, ecient
and extremely light. It is easy to carry with the help of a shoulder strap. The
machine is suitable for a range of dierent purposes and the possibility to
use a long extention cord eases operation in various sites. It is also suitable
for generator use on construction sites.
The machine has both an automatic and manul mode. In the automatic
mode, you must rst select the ller wire material after which the welding
voltage and wire feed speed can be adjusted with one control according
to the thickness of the welded sheet. Thus, selecting the right parameters is
easy. In automatic mode, the length of the arc, or welding heat, is trimmed
with another control. In manual mode, the welding voltage and wire feed
speed are adjusted separately with their own controls. The use of the
machine is aided with a display which also displays the welding current,
welding voltage and wire feed speed.
3
MinarcMig 180 / © Kemppi Oy / 1117
To Next Page
Loading...
Need help?
General
